Reflection Desktop Help & HowTo > File and Data Transfer > IBM File and Data Transfer > Configure File Transfer > AS/400 Tab (Transfer Settings Dialog Box) > Advanced TCP/IP Dialog Box

Advanced TCP/IP Dialog Box

Getting there

Open a 3270 or 5250 terminal session.

The steps depend on your user interface mode.

User Interface Mode	Steps
Ribbon	On the Session ribbon, from the Transfer group, click the Transfer Settings launcher:
Reflection Browser	On the Reflection menu, choose Tools and then File Transfer. In the Transfer dialog box, click the Settings button.
TouchUx	Tap the Wrench icon and then under Tools, select File Transfer. In the Transfer dialog box, click the Settings button.

From the Protocol list, select AS/400.
Click the AS/400 tab.
Click the Advanced button.

The options are:

IP address	Type the host system address here if you do not have a Hosts file, and your system name does not have an IP address entry in the Domain Name Server for which your TCP/IP stack is configured.
Use default ports	Clear this check box to allow Reflection to communicate with host transaction programs using non-standard port numbers.

Related Topics