previous
next
This parameter can be used to specify three values: transport, host, and port. These values are named using the following syntax: transport://host:port.
You can define all or part of the hostURL. If you omit the host name, a dialog box prompts for a host when the session starts; if you omit the port or transport, Reflection automatically includes default values. The default value for the transport is determined by the transport parameter if one is specified. Otherwise, the transport and the port are both selected from Reflection program defaults. If you know which transport or port you need, however, it is recommended that you specify them in this parameter instead of depending on the defaults.
NOTE:The recommended method for configuring most settings is to use the dialog box equivalents where available. In these cases, parameters should be restricted to static pages or scripted sessions. The equivalent setting for the hostURL parameter is Host.
|
Host |
Values |
|---|---|
|
IBM 3270 |
<host name or IP address> <host name or IP address>:<port> tn3270:// tn3270://<host name or IP address> tn3270://:<port> tn3270://<host name or IP address>:<port> tn3270e:// tn3270e://<host name or IP address> tn3270e://:<port> tn3270e://<host name or IP address>:<port> demo://ibm3270 |
|
IBM 3270 Printer The default port number for the tn3270e transport is 23. The port may be different for your organization. To change the default, specify the port number in this parameter. |
<host name or IP address> <host name or IP address>:<port> tn3270e:// tn3270e://<host name or IP address> tn3270e://:<port> tn3270e://<host name or IP address>:<port> |
|
IBM 5250 |
<host name or IP address> <host name or IP address>:<port> tn5250:// tn5250://<host name or IP address> tn5250://:<port> tn5250://<host name or IP address>:<port> demo://ibm5250 |
|
IBM AS/400 Printer |
<host name or IP address> <host name or IP address>:<port> tn5250:// tn5250://<host name or IP address> tn5250://:<port> tn5250://<host name or IP address>:<port> |
|
IBM AS/400 Data Transfer The transport and port values are not used for IBM AS/400 data transfer; only the host name or IP address is used. |
<host name or IP address> |
|
HP |
<host name or IP address> <host name or IP address>:<port> nsvt:// nsvt://<host name or IP address> nsvt://:<port> nsvt://<host name or IP address>:<port> telnet:// telnet://<host name or IP address> telnet://:<port> telnet://<host name or IP address>:<port> demo://HP3000 demo://UNIX |
|
VT |
<host name or IP address> <host name or IP address>:<port> telnet:// telnet://<host name or IP address> telnet://:<port> telnet://<host name or IP address>:<port> demo://digital demo://UNIX |
|
UTS |
<host name or IP address> <host name or IP address>:<port> int1:// int1://<host name or IP address> int1://<port> int1://<host name or IP address>:<port> airgate:// airgate://<host name or IP address> airgate://<port> airgate://<host name or IP address>:<port> matip:// matip://<host name or IP address> matip://<port> matip://<host name or IP address>:<port> pepgate:// pepgate://<host name or IP address> pepgate://<port> pepgate://<host name or IP address>:<port> |
|
T27 and T27 Printer |
<host name or IP address> <host name or IP address>:<port> tcpa:// tcpa://<host name or IP address> tcpa://<port> tcpa://<host name or IP address>:<port> |
|
ALC |
<host name or IP address> <host name or IP address>:<port> lantern:// lantern://<host name or IP address> lantern://<port> lantern://<host name or IP address>:<port> airgate:// airgate://<host name or IP address> airgate://<port> airgate://<host name or IP address>:<port> matip:// matip://<host name or IP address> matip://<port> matip://<host name or IP address>:<port> atstcp:// atstcp://<host name or IP address> atstcp://<port> atstcp://<host name or IP address>:<port> sabre:// sabre://<host name or IP address> sabre://<port> sabre://<host name or IP address>:<port> tcpfrad://<hostname>:<port> tcpfrad://<host name or IP address>:<port> udpfrad:// udpfrad://<host name or IP address> udpfrad://<port> udpfrad://<host name or IP address>:<port> |
The transport, host, and port are all specified: <param name="hostURL" value="tn3270://jupiter:23">
Only the host is specified, and the default transport and port are used:<param name="hostURL" value="jupiter">
The transport and host are specified, and the default port is used: <param name="hostURL" value="tn3270://jupiter">
The host and port are specified, and the default transport is used. <param name="hostURL" value="jupiter:23">