docmain.css" /> Connecting using HTTP - Reflection ZFE 2.3.4

6.3 Connecting using HTTP

If you do not have a trusted certificate in place, you can configure Reflection ZFE to use HTTP. This configuration is not secure and should be used only when no other option is available.

Connecting to...

Do this...

An existing remote MSS Administrative Server

  1. During the Reflection ZFE installation, after you accept the license agreement and choose a destination directory, select Use remotely hosted MSS. Click Next.

  2. Enter either the host name, DNS name, or IP address.

  3. Change the port from 443 to 80.

  4. Select HTTP and complete the installation process.

The MSS Administrative Server that is installed with Reflection ZFE

  1. Select Install MSS and follow the installation instructions.

  2. Clear the Perform this action option and click Finish.

    If this option is not disabled, you can open <install-directory>\Micro Focus\ReflectionZFE\sessionserver\conf\container.properties in a text editor and change 443 to 80 in the following line: management.server.url=http://yourmachine:80/mss

    If this option is not cleared, an internal error is generated and you will be asked to contact your system administrator.

  3. Restart the Reflection ZFE Session Server service.