The following is a list of files that are installed on the secondary system. These files are copied to the secondary system via the Databridge installation WFL:
File Name |
Description |
---|---|
DATA/ENGINE/SAMPLE/CONTROL |
Required. This data file contains options for running the Databridge Twin Engine. |
DATA/TWIN/SAMPLE/CONTROL |
Required. This Databridge Twin parameter file provides information to the Databridge Twin program on where and how to locate the Server SOURCE for the primary database. |
OBJECT/DATABRIDGE/DBINFO |
DBInfo creates reports about your DMSII database. For Databridge Twin Engine, only the DBInfo normal mode is supported because the Databridge Twin Engine does not provide access to the audit file. For instructions on DBInfo, see the Databridge Host Administrator’s Guide. |
OBJECT/DATABRIDGE/ENGINE |
Required. This is the object file for the Databridge Twin Engine, which is a subset of the full Databridge Engine. |
OBJECT/DATABRIDGE/GENFORMAT |
Optional. Object code for the Databridge GenFormat program |
OBJECT/DATABRIDGE/SUPPORT |
Required. This is the object code for the non-tailored Support library. |
OBJECT/DATABRIDGE/TWIN |
Required. This is the object file for the Databridge Twin program, which calls the Databridge Twin Engine. |
PATCH/DATABRIDGE/TWIN/DASDL |
Optional. This file is required if you use the INCLUDE statement in your DASDL instead of inserting the contents of this patch file into the DASDL. If you use an INCLUDE statement to include this file in the DASDL, this file must be on both the primary and the secondary systems. |
SYMBOL/DATABRIDGE/DMSIISUPPORT |
Required. This file is the source file for the DMSIISupport Library that will update the secondary database. |
SYMBOL/DATABRIDGE/INTERFACE |
Optional. This file supplies the API for the Databridge Engine. It is required for compiling the Support Library. |
SYMBOL/DATABRIDGE/SUPPORT |
Optional. This is the source code for the Support Library. |
WFL/DATABRIDGE/INCLUDE/DBTITLE |
Required. This WFL source file is required for running any Databridge WFL. It parses the database name you enter when you start the WFL |
WFL/DATABRIDGE/INSTALL |
Required. This WFL is required for installing Databridge Twin. |
WFL/DATABRIDGE/SAMPLE/COMP |
Optional. This WFL compiles the Support Library. |
WFL/DATABRIDGE/SAMPLE/TWIN |
Required. This is the WFL for running the Databridge Twin program. |
WFL/DATABRIDGE/SAMPLE/INCLUDE/SSRTITLES |
Required. This WFL source file is included by WFL/DATABRIDGE/COMP to specify the location of the compilers for each SSR (system software release). |
WFL/DATABRIDGE/TWININITIALIZE |
Optional. If you run this WFL, it starts WFL/DATABRIDGE/TWIN with the LOAD command. NOTE:This feature is deprecated, but still operates to support legacy use. |
After you have verified the files, you are ready to configure the primary and secondary databases (see Configuring Databridge Twin in the DataBridge Twin Administrator’s Guide).
To replicate the primary database, see the chapter “ Replicating a Database” in the DataBridge Twin Administrator’s Guide.