previous
next
File transfer speed can be affected by number of factors, including the CPU power of your client and server systems, available bandwidth The rate of transmission of data across the network; the maximum amount of information (Kbits/second or Mbits/second) that can be transmitted along a channel. for transfers, and latency The time delay between when an action is initiated and when its effect is detectable. In a network, a delay in the reception of data packets can be caused by several factors, such as the transmission medium, and the number of network devices between the sending and receiving points. In general, the greater the physical distance between your workstation and your host, the greater the chance of encountering latency. in your network. In most cases, you'll see the best performance using the Reflection for Secure IT default settings. In some cases, the following settings may affect transfer speeds.
Check compression settings
You can configure compression on both the client and server using the Compression keyword. You can specify compression values 0-9. The default value for the server is 6. The default value for the client is 0. Increasing the value increases the amount of compression. Using higher values results in the use of less network bandwidth, but at the cost of more CPU cycles.
Lowering the Compression value or setting it to zero may improve performance if your files are already compressed, if your network bandwidth is large, or if your computer has limited CPU power.
Increasing the Compression value may improve performance if your files are uncompressed, network bandwidth is small, or your CPU is not a limiting factor.
Check smart copy and checkpoint resume settings
Smart Copy and Checkpoint Resume help minimize the amount of time spent repeating unnecessary transfer of data. These features use a series of hashes sent between the client and server to determine if part or all of a file is identical. Identical content is not transferred. This functionality is enabled by default. If you transfer files in a high latency network, the time required to send the hash values across the network can cause delays that exceed the benefit of using these features.
If you transfer large files across a high latency network, you may be able to improve performance by disabling the smart copy and checkpoint resume feature. To disable these features from the client, set SmartFileCopy and CheckpointResume to no. To disable these features from the server, set SmartFileTransfer to no.
Check High Performance Network (HPN) settings
Reflection for Secure IT supports HPN features that maximize file transfer performance. This functionality is enabled by default.
To ensure best performance, confirm that HPNDisabled is set to 'no' (the default) on both the client and server.
NOTE:Transfer speed improvements from enabling HPN on client and server are most noticeable in networks with high latency The time delay between when an action is initiated and when its effect is detectable. In a network, a delay in the reception of data packets can be caused by several factors, such as the transmission medium, and the number of network devices between the sending and receiving points. In general, the greater the physical distance between your workstation and your host, the greater the chance of encountering latency. and high bandwidth The rate of transmission of data across the network; the maximum amount of information (Kbits/second or Mbits/second) that can be transmitted along a channel. .