If you are running in domain mode, you can use Reflection X Advantage remote session services to provide both session persistence and improved performance on some networks. Remote session services are configured on a per session basis from X Manager for Domains or the Administrative Console. These settings determine when and where sessions are held in memory.
NOTE:
The default domain node available.
setting is . To use any of the other remote session services, you must be connected to a domain with at least oneWhen you exit X Manager for Domains, your currently running sessions may stop or they may continue to run as suspended sessions. What happens depends on your setting for
, your setting for , and whether or not you leave the session before you exit X Manager for Domains. For example, if = , = , and you exit X Manager for Domains with a session window still open, Reflection X Advantage automatically stops the session. If = and you exit X Manager for Domains with a session window still open, or with a session suspended, the session will continue to run as a suspended session.To configure remote session services
Start X Manager for Domains.
Select a session. On the
tab, under , select one of the following settings:
(Default) |
|
|
With this option, your session runs on your workstation, and remains available as long as X Manager for Domains is running. The session ends when you close X Manager for Domains or your workstation shuts down. |
|
|
|
Use this option to be able to rejoin a session even after you close X Manager for Domains and shut down your workstation. NOTE:With this configuration, your session does not persist if your workstation shuts down unexpectedly. |
|
|
|
Use this option to improve performance when you connect to an X client over a high-latency network (typically one in which your X Manager for Domains workstation is located far from the X client host computer). NOTE:With this configuration, your session may not persist if your workstation shuts down unexpectedly. |
|
|
|
Use this option to ensure that your session is guaranteed to remain running even in the event that your workstation shuts down unexpectedly. (This option also improves performance when you connect to an X client over a high-latency network.) Use to shut down the session automatically if it has been suspended for the specified time without being rejoined. This setting applies if the session is suspended because of an unexpected shutdown and also if you suspend the session by selecting in response to the prompt. This option is not available when is set to . |