Reflection for Secure IT Gateway - Administrator’s Guide > Initial Reflection Gateway Configuration > Initial Configuration Steps for Using Transfer Sites

Initial Configuration Steps for Using Transfer Sites

This is an overview of initial configuration steps for using Transfer Sites. Detailed procedures follow in the How To section. Steps do not need to be in this order. Step 1 is required before Transfer Sites can be used. Other steps are common to most implementations.

To configure Reflection Gateway for Transfer Sites

  1. Enable Reflection Gateway Connections in the Reflection Secure Shell Proxy.

  2. Log onto Gateway Administrator.

  3. Configure email support.

  4. Set up the Transfer Site File Server. (If you have added servers for Jobs, this can be one of those servers or it can be a different server.)

  5. Provision users using either or both of these methods:

  6. Configure server certificates.

If you are also going to use Jobs, see Initial Configuration Steps for Using Jobs.

Related Topics